USA-Made Surgical Masks

We believe every American should have access to medical-grade, surgical face masks at a great price. Designed, developed, and manufactured at our Texas facility, each mask is rigorously tested for quality and safety.

✓ Triple-layered, breathable, and lightweight
✓ Metal nose bridge for secure fit & less glasses fog
✓ Two-way protection
✓ Rated at ASTM F2100 Level 3
✓ Made in America

Below are independently verified lab results from the several required tests, in which Armbrust masks returned better margins than required by established standards.

FDA Letter: 510K Approval - Armbrust Surgical Masks

• Armbrust Surgical Masks FDA 510K (PDF)

Disposable Face Mask Colors Lab Results (Nelson Labs)

• Justification Surgical Mask Color - Product: USA-Made Surgical Masks (PDF)

Better Mask High Filtration System Lab Results:

• Armbrust Surgical Masks (Better Mask Kit) Test Results (PDF)
• FTM Essential Brace (Better Mask Kit) Test Results (PDF)

Filtering Facemask Respirator  (AA-1776) Lab Results:

• Intertek Laboratory Testing Results Report (PDF)

Surgical Mask Lab Results:

BFE Test ( BFE Test Full Report)

“Bacterial Filtration Efficiency” is a test that shows the amount of bacteria that can get through our masks. Nelson Labs used aerosolized Staphylococcus Aureus to test Armbrust masks, and despite accidentally using nearly 10 times the amount that is usually required for a test like this, they passed with 99.2%+ Efficiency -- well above the ASTM II & III requirements.

PFE Test ( PFE Test Full Report)

“Particle Filtration Efficiency” tests the size of particles that can pass through a mask. Armbrust masks were well above the 98% required for ASTM II. It should be noted that a PFE rating of 98% typically blocks most particles down to about 0.3 microns — the Staphylococcus Aureus bacteria used in our BFE test can get as small as 0.1 micron (about the size of the CoronaVirus).

Differential Pressure Test ( Differential Pressure Test Full Report)

This test is used to determine the breathability of Armbrust surgical masks. Sure, you might be able to block viruses, but can you still breath? Even with our higher BFE of 99%+, we passed with much better breathability than normal — in most cases under 4.9 (mm H2O/cm2) versus the requirement of being less than 6.0 (mm H2O/cm2) — also attached.

Synthetic Blood Penetration Test ( Synthetic Blood Penetration Test Full Report)

This procedure was performed to evaluate surgical face masks and other types of protective clothing materials designed to protect against fluid penetration. The purpose of this procedure is to simulate an arterial spray and evaluate the effectiveness of the test article in protecting the user from possible exposure to blood and other body fluids. All 32 masks tested passed synthetic blood spray at 160 mmHg with no penetration seen.

Flammability Test ( Flammability Test Full Report)

Meant to ensure that a face mask will not ignite and burn for more than 3.5 seconds. All of our masks burned for less than one second, passing this requirement.

Cytotoxicity Test ( Cytotoxicity Test Full Report)

Designed to test if people will have a reaction when wearing our masks. On a scale of 0–4, with zero being no reaction and four being a severe reaction, masks that on average hit a 2 or lower pass this test. All of our masks received a grade of 0 and passed.

 

Irritation Intracutaneous Toxicity Test ( Irritation Intracutaneous Toxicity Test Full Report)

"The purpose of the study is to determine the potential irritation effects of the test article extract as a result of an intracutaneous injection in New Zealand White rabbits."

Sensitization Kligman Maximization Test ( Sensitization Kligman Maximization Test Full Report)

"The purpose of the study was to determine the potential allergenic or sensitizing capacity of the test article. The study was used as a procedure for screening of contact allergens in guinea pigs and extrapolating the results to humans, but it does not establish the actual risk of sensitization."

We're here to help!

If you're not satisfied about anything at all, please don't hesitate to reach out to us at support@armbrust.com!

Earloop Issue?

Our earloops are sonically welded and held to the highest industry standard, but breakages still happen. That's why we offer an earloop guarantee - in practical terms that means if you experience any issues we will issue a pro-rated refund on a per mask basis.

Just write up the issue you're having and send a pic of the broken earloop to Support@armbrustusa.com and our team will make it right.

-------------------------

All Returns MUST begin by emailing: Support@armbrustusa.com 
(Please include receipt or proof of purchase)

All sales are final with the following exceptions.

30-Day Policy: If 30 days have gone by since your purchase, unfortunately we cannot offer a refund or exchange.

Returns: Customers are responsible for paying all shipping costs for any purchased items they wish to return. We DO NOT issue return shipping labels for returned items.

Eligibility: Your item must be unused and in the same condition and original packaging. Only regular priced items may be refunded. Donation Packs are non-refundable, non-returnable. Receipt or proof of purchase is required to process all returns.

Exchanges: In some instances, items deemed defective or damaged can be replaced or exchanged. For exchanges, email support@armbrustusa.com. 

There are certain situations where only partial refunds are granted: (if applicable)

1. Masks with obvious signs of use
2. Mask packaging that has been opened
3. Any item not in its original condition, is damaged or missing parts for reasons not due to our error.

Refunds (if applicable)

Once a return is received and inspected, our support team will send a confirmation email as well as a notification on its review status.

If you are approved, a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days (transaction times may vary based on payment method).

Late or missing refunds

First, check your bank account to verify refund has not gone through. Then, contact your bank or credit card company, as it may take some time before your refund is officially posted as processing times may vary. If you’ve done all of this and you still have not received your refund, please contact us at support@armbrustusa.com.